Min. Diameter mm | 0.07 mm (0.003") |
Max. Diameter mm | 2 mm (0.079") |
Diameter Increments | 0.01 mm (0.001") |
Max. Stripping Length | 29 mm (1.14") |
Stripping Length Increments | 0.01 mm (0.001") |
Cable Clamping | Motor driven with programmable clamping force |
Stripping Steps | 9 |
Dimensions (L x W x H) | 494 x 140 x 218 mm (19.4" x 5.5" x 8.6") |
Weight | 9 kg (20 Ibs.) |
CE-Conformity | The CoaxStrip 5300 RX fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Min. Diameter mm | 0.15 mm (36 AWG / 0.006“) |
Max. Diameter mm | 4 mm (0.157“) |
Diameter Increments | 0.01 mm (0.001) |
Max. Stripping Length | 27 mm (1.06") |
Stripping Length Increments | 0.01 mm (0.001") |
Cable Clamping | Motor driven with programmable clamping force |
Stripping Steps | 9 |
Cycle Time | ≥ 4 s (depending upon cable type and programming) |
Dimensions (L x W x H) | 494 x 140 x 218 mm (19.4" x 5.5" x 8.6") |
Weight | 10 kg (22 Ibs.) |
CE-Conformity | The CoaxStrip 5300 NT fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Max. Diameter mm | 7 mm (0.276“) |
Diameter Increments | 0.01 mm (0.001“) |
Max. Stripping Length | 30 mm (1.18“) |
Stripping Length Increments | 0.01 mm (0.01”) |
Cable Clamping | Motor driven with programmable clamping force |
Stripping Steps | 9 |
Cycle Time | ≥ 4 s (depending upon cable type and programming) |
Dimensions (L x W x H) | 494 x 140 x 218 mm (19.4" x 5.5" x 8.6”) |
Weight | 9.7 kg (21 lbs.) |
CE-Conformity | The CoaxStrip 5300 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Max. Diameter mm | 11 mm (0.43“) |
Diameter Increments | 0.01 mm (0.001“) |
Max. Stripping Length | 40 mm (1.58“) |
Stripping Length Increments | 0.01 mm (0.001“) |
Cable Clamping | Motor, clamping force programmable |
Stripping Steps | 9 |
Cycle Time | > 4 s (depending upon cable type and programming) |
Dimensions (L x W x H) | 480 x 140 x 235 mm (18.9 x 5.5 x 9.3”) |
Weight | 12 kg (26.7 lbs.) |
CE-Conformity | The CoaxStrip 5400 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Max. Diameter mm | 15 mm (0.59“) |
Diameter Increments | 0.01 mm (0.001“) |
Max. Stripping Length | 85 mm (3.35“) |
Stripping Length Increments | 0.01 mm (0.001“) |
Cable Clamping | Motor driven with programmable clamping force |
Stripping Steps | 9 |
Cycle Time | ≥ 7 s (depending upon cable type and programming) |
Dimensions (L x W x H) | 689 x 199 x 311 mm (27.1 x 7.8 x 12.2”) |
Weight | 20 kg (43 lbs.) |
CE-Conformity | The CoaxStrip 5500 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Min. Conductor Diameter | 0.15 mm (0.006”) / (36 AWG) |
Wire Size Stranded | Standard mode: 52 mm (2.05”) – 1000 m (39.370”) Short mode < 52 mm (2.05”) |
PC Software | Cayman PC Software |
Max. Cable OD | 6.5 mm (0.26”) |
Pull off Length Right Side | Left side 40 mm (1.57”) Right side 40 mm (1.57”) |
Pull off Length Left Side | Left side 40 mm (1.57”) Right side 999.9 mm (39.37”) |
Max. Transport Speed | Up to 1.95 m/s (6.4 ft/s) |
Dimensions (L x W x H) | 660 x 580 x 390 mm (25.9 x 22.8 x 15.3”) |
Weight | approx. 80 kg (154 lbs.) |
CE-Conformity | The PowerStrip 9500 RX fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility |
Min. Conductor Diameter | 0.15 mm (0.005”) / (36 AWG) |
Wire Size Stranded | Min. 18 mm (0.70”) + stripping length Max. 1000 m (39.370”) |
PC Software | Cayman PC Software |
Max. Cable OD | 3.6 mm (0.14”) |
Pull off Length Right Side | Left side 6 mm (0.236”) (with special guide 8 mm) Right side 8 mm (0.315”) (without guide, depending on cable, 11 mm) |
Pull off Length Left Side | Left side 6 mm (0.236”) (with special guide 8 mm) Right side 999.9 mm (39.37”) |
Stripping Steps | Up to 1 m/s |
Dimensions (L x W x H) | 660 x 580 x 400 mm (25.9 x 22.8 x 15.7”) |
Weight | approx. 65 kg (143.29 Ibs.) |
CE-Conformity | CE-Conformity |
Max. Cable Diameter | 7 mm (0.276") |
Diameter Increments | 0.01 mm (0.01") |
Wire Cross Section | 0.032 - 6 mm² |
Max. Stripping Length | 33 mm (1.30") |
Stripping Length Increments | 0.01 mm (0.01") |
Max. Stripping Steps | 3 |
Cable Clamping | Motor driven with programmable clamping force |
Cycle Time | ≥ 4,2 s (depending upon cable type and programming) |
Production Rate | max. 650 pcs./h (depending upon cable type and programming) |
Program Capacity | 1000 cables |
Interfaces | Foot pedal, USB "Host" |
Noise Level | < 70 db (A) |
Power Supply | 100/115 VAC, 230/240 VAC, 100 VAC, 50/60 Hz |
Dimensions (L x W x H) | 390 x 130 x 280 mm (15,3 x 5.1 x 11") |
Weight | 10 kg (22 lbs.) |
CE–Conformity | The CoaxStrip 5200 complies fully with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Important Note | Schleuniger recommends that wire samples be submitted in case where there is doubt as to the processing capabilities of a particular machine. |