Corrugated Tube Cutting Machines

  » WSM 30 E
  1. The corrugated tube cutting machine WSM 30 E is suitable to cut non-slitted corrugated tubes of 7 to 32 mm outer diameter. The cut is carried out in rotation mode, where the cutting blades turn continuously round the product to cut the material at the precise position of the specified length.


  2. click to enlarge
  » WSM 60 ESB
  1. The corrugated tube cutting machine WSM 60 ESB is suitable to cut corrugated tubes on the wave crest or to cut tubes of special geometries in a burr-free procedure. The WSM 60 ESB was particularly designed to process tubes of special forms, as for example applied in the automotive industry and white goods.

  2. click to enlarge
  » WSM 60 E
  1. The corrugated tube cutting machine WSM 60 E is suitable to cut non-slitted corrugated tubes of 7 to 60 mm outer diameter. The cut is carried out in rotation mode, where the cutting blades turn continuously round the product to cut the material at the precise position of the specified length.

  2. click to enlarge
Close X

WSM 30 E



The corrugated tube cutting machine WSM 30 E is suitable to cut non-slitted corrugated tubes of 7 to 32 mm outer diameter. The cut is carried out in rotation mode, where the cutting blades turn continuously round the product to cut the material at the precise position of the specified length.

Optionally, the WSM 30 E can be fitted with a slitting unit, which slits the corrugated tube longitudinally. This allows to build up stocks of non-slitted corrugated tubes which can be finally processed as slitted or non-slitted material.

To process special forms with the WSM 30 E, supplementary accessories are available.

Technical Specifications
Drive Motor Servo
Drive Cutting Head three-phase motor
Length 900 mm
Depth 500 mm
Height 1800 mm
Control Panel membrane keyboard
Display multilingual (selectable)
Operating Hours and Counter Included
Stop at End of Material Included
Length Input 0.1 mm steps
Max. Length Input 999,999 mm
Upper Belt Lift Pneumatically
Throughput height/-width 7 - 32 mm
Weight 180 kg
Air supply 4 bar / 28 psi
Power supply 3 x 400 V / N / 50-60 Hz)
Close X

WSM 60 ESB



The corrugated tube cutting machine WSM 60 ESB is suitable to cut corrugated tubes on the wave crest or to cut tubes of special geometries in a burr-free procedure. The WSM 60 ESB was particularly designed to process tubes of special forms, as for example applied in the automotive industry and white goods.

The WSM 60 ESB is also suitable to cut non-slitted corrugated tubes of 10 – 60 mm outer diameter. The cut is carried out in rotation mode, where the cutting blades turn continuously round the product to cut the material at the precise position at the specified length. Clamping jaws, which fixate and stabilise the tube during the cutting process, are additionally available and are selectable. Up to 3 clamping-jaw-forms can be applied and selected by means of the machines' control panel.

The tube position is identified by a laser light barrier or alternatively by a high-resolution camera system.

For in-line-operation with an extrusion system, additional accessories are available. The processing direction of the WSM 60 ESB is from right to left.

The WSM 60 ESB can optionally be fitted with a slitting unit, which is able to slit the standard corrugated tube longitudinally.

Technical Specifications
Drive Motor Servo
Drive Cutting Head three-phase motor
Feeding Length 1000 mm
Length 2100 mm
Depth 950 mm
Height 2000 mm
Control Panel membrane keyboard
Display German / English
Operating Hours and Counter Included
Stop at End of Material Included
Speed up to 1 m / sec.
Length Input 0.1 mm steps
Max. Length Input 999,999 mm
Upper Belt Lift manually
Throughput height/-width up to 60 mm
Weight 470 kg
Air supply 6 bar / 87 psi
Power supply 3 x 400 V / N / 50-60 Hz)
Close X

WSM 60 E



The corrugated tube cutting machine WSM 60 E is suitable to cut non-slitted corrugated tubes of 7 to 60 mm outer diameter. The cut is carried out in rotation mode, where the cutting blades turn continuously round the product to cut the material at the precise position of the specified length.

Optionally, the WSM 60 E can be fitted with a slitting unit, which slits the corrugated tube longitudinally. This allows to build up stocks of non-slitted corrugated tubes which can be finally processed as slitted or non-slitted material.

To process special forms with the WSM 60 E, supplementary accessories are available.

Technical Specifications
Drive Motor Servo
Cutting Head three-phase motor
Feeding Length 200 mm
Length 1400 mm
Depth 800 mm
Height 1800 mm
Control Panel membrane keyboard
Display multilingual (selectable)
Operating Hours and Counter Included
Stop at End of Material Included
Feeding Rate up to 6000 mm / min
Length Input 0.1 mm steps
Max. Length Input 999,999 mm
Upper Belt Lift Pneumatically
Throughput height/-width up to 60 mm
Weight 305 kg
Air supply 6 bar / 87 psi
Power supply 3 x 400 V / N / 50-60 Hz)
Close X

CableCoiler 4000

Coiling Machine


The CableCoiler 4000 is a motorized heavy-duty cable coiling machine designed to interface with the MegaStrip 9600. It coils cable up to an inner diameter of 600 mm (23.6") and handles cable coils weighing up to 80 kg (178 lbs.)
Technical Specifications
Coiling Stations 1
Cable Diameter 35 mm (1.38 ")
Coil Diameter 250-600 mm
Optional 81 - 152 mm
Coil Weight 80 kg (176 Ibs.)
Revolution Speed max. 133 1/min
Speed at max. Coil Diameter 4.2 m/s
Coil Outer Diameter max. 750 mm (30 inch)
Speed at min. Coil Diameter 1.7 m/s
Coil Inner Diameter 250-600 mm (10 – 24 inch)
Stacking Concept n/a
Dereeling Concept n/a
Storage Spool dereeling
Dimensions (L x W x H) 1‘230 x 1‘060 x 1’260 mm (48" x 42" x 50")
Weight 180 kg (396 Ibs.)
CE-Conformity The CableCoiler 4000 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.