Ferrule / Electric Crimpers

  » EC 65 Electric Crimper
  1. The EC 65 is compact and lightweight, yet rugged enough for the factory floor. It is well suited for complex cable harness assemblies.

  2. click to enlarge
  » MC 25 Automatic Stripper and Crimper
  1. The extremely handy Automatic Stripper and Crimper MC 25
    Insulation stripping and crimping in 1.5 seconds

  2. click to enlarge
  » MC 40 Automatic Stripper and Crimper
  1. Stripping and crimping in one operation (for insulated wire end sleeves 0.25–4 mm²)

  2. click to enlarge
  » CS 60 Wire Stripper
  1. The electrically operated CS 60 is very easy to use.
    Convenient wire stripping 0,08 - 6 mm²

  2. click to enlarge
  » AC-Series Pneumatic Crimpers AC 25/25 T, AC 100/100 T
  1. With the pneumatic crimpers crimp wire end sleeves quickly and without effort.

  2. click to enlarge
  » LC 100 Cross Cutting Machine
  1. Rational and precise cross cutting of cables, strands, tubes and similar profiles up to a diameter of 8 mm.

  2. click to enlarge
  » DR 30 Dereeler
  1. The DR 30 is an useful supplement to the Cross Cutting Machine LC 100 and makeswire feeding easier for both loose hanks or reel mounted cable.

  2. click to enlarge
  » DC 125 Wiring Duct Cutter
  1. For fast, accurate cutting of wiring ducts to length

  2. click to enlarge
  » RC 300 DIN Rail Cutter
  1. For fast, accurate cutting of DIN rails to length

  2. click to enlarge
Close X

Electric Crimper EC 65

Hot Stamp Marking Machine


The EC 65 is compact and lightweight, yet rugged enough for the factory floor. It is well suited for complex cable harness assemblies. The EC 65 is an ideal device to securely crimp wires and cable terminals such as:
  1. Insulated cable lugs to 6 mm² / 10 AWG
  2. Tubular cable lugs, solderless terminals to 10 mm² / 8 AWG
  3. Flat tab terminals to 6 mm² / 10 AWG
  4. Wire end sleeves to 50 mm² / 1 AWG
Technical Specifications
Dimensions (B x H x T) 140 x 220 x 320 mm
Weight of EC 65 10 kg
Weight of foot pedal 1,2 kg
Max. press capacity 10 kN
Pressing time 1 s
Counter 6-digit LCD display
Mains connection 230 V/50 Hz (120 V/60 Hz)
Power consumption: 160 VA
Close X

Automatic Stripper and Crimper MC 25

Hot Stamp Marking Machine


The extremely handy Automatic Stripper and Crimper MC 25 Insulation stripping and crimping in 1.5 seconds
Technical Specifications
Mains power 230 V / 50 Hz
Power input 80 VA
Operating range 0,5 - 2,5 mm² / 20 -14 AWG
Wire end sleeves in accordance with DIN 46 228 part 4 tape mounted
Crimp section trapezoidal
Cycle 1.5 s approx.
Control microprocessor-controlled cam drive
Unit Counter LCD display
Changing applicators under 10 s
Dimensions 165 x 270 x 320 mm (W x H x D)
Weight 12 kg
Close X

Automatic Stripper and Crimper MC 40 & MC 40 L

Stripping and crimping in one operation


Technical Specifications

MC 40

Cross section 0,5-1,5 mm² / AWG 24-16
Length of crimp 8 mm (Option 6, 10, 12 mm)
Add-on kit 0,25 0,25-0,34 mm² - 6 / 8 mm
Add-on Kit 2,5 2,5 mm² - 8 / 10 / 12 mm
Add-on kit 4,0 4 mm² - 10 mm
Full cycle 1,5 sec.
Stripping blades V-Form
Power supply AC 230 V (110 V)
Compressed air supply 5 bar / 72 psi.
Dimension(L x W x H) 405 x 240 x 490 mm²
Weight 29 kg / 64 lb.

MC 40 L

Cross section 4/6/10 mm²
Tool kit 4-10/12 4 mm² - 10/12 mm
Tool kit 6 6 mm² - 12 mm/td>
Tool kit 10 10 mm² - 12 mm
Full Cycle 1,5 sec.
Stripping blades AC 230 V (110 V)
Power supply V-Form
Dimension(L x W x H): 405 x 240 x 490 mm²
Weight 29 kg / 64 lb.
Close X

CS 60 Wire Stripper


Convenient wire stripping 0,08 - 6 mm²
Technical Specifications
Stripping diameter 0,08-6 mm² / AWG 28-10
max. cale O.D. 6 mm
Stripping length (X) 3-20 mm
Partial stripping length 2-20 mm
SFeed-in length 15 mm plus X
Cycle Time (full strip) 0,3 sec.
Stripping blades V-Form
Power Supply AC 230 V (110 V)
Dimension (L x W x H): 363 x 141 x 221 mm
Weight 9,5 kg / 21 lb.
Close X

AC 25/25 T, AC 100/100 T for wire end sleeves

AC 25/25 T and AC 100/100 T pneumatic crimpers crimp wire end sleeves quickly and without effort.



  1. The AC 25 and AC 100 is lightweight and easy to use. The crimping mechanism is easily activated, making it perfectly suited for work in control cabinets and electrical equipment.
  2. Table top versions of AC 25 T and AC 100 T are actuated by a foot switch, allowing the operator to use both hands. These versions are perfect for bench work such as cable assemblies.
  3. These tools are maintenance free – they require no routine calibration – only 60–90 psi to allow proper operation. With their rugged polyamide casings they are ideal for heavy duty use in industry.
Close X

Cross Cutting Machine LC 100


Rational and precise cross cutting of cables, strands, tubes and similar profiles up to a diameter of 8 mm.
Technical Specifications
max. Cutting capacity 8 mm / 3.2 Inch
Cutting capacity, fine wire 0,08 - 10 mm2 / 28-8 AWG
max. length 9999 mm / 999.9 Inch
Language D / GB / F / I / E
Unit of measurement mm / Inch
Feed speed max. 0,5 m/sec
Mains connection 230V/50HZ (115V/60HZ)
Dimension (W x L x H) 194 x 295 x 227 mm
Weight 11 kg
Close X

Dereeler DR 30


The DR 30 is an useful supplement to the Cross Cutting Machine LC 100 and makes wire feeding easier for both loose hanks or reel mounted cable.
Technical Specifications
Reel Plate 300 mm
Reel Hub Ø 80 - 170 mm
Reel Width max. Ø 260 mm
Reel Height max. 120 mm
Reel Weight max. 7 kg
Dimensions (W x H x D) 420 x 380 x 200 mm
Weight 2 kg
Close X

Wiring Duct Cutter DC 125


For fast, accurate cutting of wiring ducts to length
Technical Specifications
Cutting width 125 mm
Length stop max. 1000 mm
Dimensions (L x W x H) 1290 x 290 x 760 mm
Weight 10,5 kg
Art.-No. DC 125
Feed speed max. 0,5 m/sec
Mains connection 230V/50HZ (115V/60HZ)
Dimension (W x L x H) 194 x 295 x 227 mm
Weight 11 kg
Close X

DIN Rail Cutter RC 300

For fast, accurate cutting to length of DIN EN 60715 support rails


  1. The RC 300 is used for cutting support rails (DIN rails) to length DIN rails sizes TH 35-15, TH 35-7.5 and TH 15-5,5
  2. DIN rails can be cut to the desired length quickly and without burr. Thanks to its optimally designed lever ratio, RC 300 requires little force, so anyone can operate it.
  3. Because of the 1 m long scale, with length stop, the DIN rails can be cut exactly true to length.
  4. The cutting edges are correctly angled, and no subsequent machining is required.
  5. The Workplace remains clean and free of swarf.
Technical Specifications
Profiles EN 60715 TH 35-15 / TH 35-7,5 / TH 15-15.5
max. Gauge length max. 1000 mm
Dimension (L x W x H) 1090 x 150 x 760 mm
Weight 8,3 kg / 18.3. lb.
Art.-Nr RC 300