Pull Force Testers

Schleuniger offers several products for quality assurance and trace- ability of quality data. From crimp force monitoring, crimp height measuring and pullforce testing devices to fully integrated networks including software for central data management and analysis.

Schleuniger's PullTesters are motorized benchtop devices, designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections.
  » PullTester 20
  1. Pull force measuring device.

    Measuring range:
    up to 500 N
    Max. stroke: 48 mm (1.89")
    Pull Speed: 25 or 50 mm/min
    50 or 100 mm/min

  2. click to enlarge
  » PullTester 25
  1. Dual-range pull force measuring device.

    Measuring range:
    500 N / 1000 N (110 / 220 lb.)
    Max. Stroke:43 mm (1.69")
    Pull Speed:25 or 50 mm/min
    50 or 100 mm/min

  2. click to enlarge
  » PullTester 26
  1. Dual-range pull force measuring device with different pulling modes.

    Measuring range:
    500 N / 1000 N (110 / 220 lb.)
    Cycle time:
    4 speeds: 25, 50, 100 mm/min and high

  2. click to enlarge
  » PullTester 27
  1. Dual-range pull force measuring device.
    Available in 2 versions:


    - PullTester 27 (standard):

    Measuring range: 2'000 / 5'000 N


    - PullTester 27-10 (special version):

    Measuring range: 5'000 / 10'000 N
    Pull Speed: 25 or 50 mm/min
    50 or 100 mm/min

  2. click to enlarge
  » PullTester 28
  1. Dual range pull force measuring device with different pulling modes. Available in 2 versions:


    - PullTester 28 (standard):

    Measuring range: 2'000 / 5'000 N


    - PullTester 28-10 (special version):

    Measuring range: 5'000 / 10'000 N
    Network compatible 4 speeds: 25, 50, 100 mm/min and high

  2. click to enlarge
Close X

PullTester 20

Pull Testing Machine


The PullTester 20 is an economical motorized benchtop device for measuring pull forces of crimp connections as well as ultrasonic metal welding connections.

» Speed controlled motor for consistent pull rates
» Simple LCD display for easy programming & reading
» Repeatable & accurate data
» Versatile terminal (crimp) holder
» RS 232 interface for curve analysis & statistics with optional WinCrimp PC software
Technical Specifications
Measuring Range Up to 500 N (110 lbs.)
Units of Measure N, Kp, lbs.
Display LCD 4-digit
Applied Force Accuracy 0.4% of full scale (± 2N or 0.44 lbs.)
Stroke Max. 48 mm (1.89")
Pulling Speed Selectable 50 or 100 mm/min (1.97" or 3.9"/min) for PullTester 20-50
Selectable 25 or 50 mm/min (0.98" or 1.9''/min) for PullTester 20-25
Pulling Modes Pull + Break
Measured-Value Memory Sending maximum pull force value to PC or serial printer
Monitoring Device display output; Optional WinCrimp statistical software for visual force-time-table on PC and with download possibility to Microsoft® Excel software
Safety IP 20
Interfaces PullTester 20-25 and PullTester 20-50 over RS 232; PullTester 20-TCP via TCP/IP
Dimensions (L x W x H) 340 x 185 x 140 mm (13.4 x 7.3 x 5.5")
Weight 5 kg (11 lbs.)
CE-Conformity The PullTester 20 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Close X

PullTester 25

Pull Testing Machine


The PullTester 25 is a dual-range, motorized benchtop device for measuring pull forces of crimp connections as well as ultrasonic metal welding connections on a broader range of wires than single-range pull test devices.

» Speed controlled motor for consistent pull rates
» Simple LCD display for easy programming & reading
» Repeatable & accurate data
» Versatile terminal (crimp) holder
» RS 232 interface for curve analysis & statistics with optional WinCrimp PC software

Technical Specifications
Measuring Range Standard: 0 – 500 N and 0 – 1000 N
(0 – 110 lbs. and 0 – 220 lbs.)
Other variations possible
Units of Measure Newton (N), Kilopound (Kp), Pound (lbs.)
Display LCD 6-digit
Applied Force Accuracy 0.2% of full scale
500 N/110 lbs.: ±1 N/0.22 lbs. or
1000 N/220 lbs.: ±2 N/0.44 lbs.)
Stroke Max. 43 mm (1.69")
Pulling Speed 2 speeds: 50 or 100 mm/min.
(1.97 or 3.94”/min.)
Pulling Modes Pull + Break
Measured-Value Memory Not available
Monitoring Device display output; Optional WinCrimp Basic software for visual force-time-table on PC for evaluation.
Safety IP20
Interfaces Rs 232
Options In combination with crimp force monitor and crimp-height measurements device via WinCrimp software. Only one device with RS 232 network. Multiple devices with RS 232-TCP/IP adapters.
Dimensions (L x W x H) 180 x 130 x 380 mm (7” x 5” x 15”)
Weight 8 kg (18 lbs.)
CE-Conformity The PullTester 25 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Close X

PullTester 26

Pull Testing Machine


Schleuniger's PullTester 26 is a dual-range, motorized benchtop device designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range of wire than single-range pull test devices. The PullTester 26 is specially suited for quality assurance in a production environment.

» Speed controlled motor provides extremely consistent readings
» 4 pulling modes for destructive & non-destructive tests
» 2 separate displays for easy reading & programming
» Standard RS 232 interface for curve analysis and downloading test data
» Networking capability

Technical Specifications
Measuring Range Standard: 0 – 500 N and 0 – 1000 N
(0 – 110 lbs. and 0 – 220 lbs.)
Other variations possible
Units of Measure Newton (N), Kilopound (Kp), Pound (lbs.)
Display Upper: LCD 6-digit for force readings
Lower: LCD 4-line for programming and operation
SApplied Force Accuracy 0.2% of full scale
500 N/110 lbs.: ±1 N/0.22 lbs. or
1000 N/220 lbs.: ±2 N/0.44 lbs.)
Stroke Max. 43 mm (1.69")
Pulling Speed 4 speeds: 50, 75, 100 mm/min. or high speed (1.97, 2.95, 3.94“/min. or high speed)
Pulling Modes Pull + Break
Measured-Value Memory Up to 48 jobs with 50 measurements (2400 measurements)
Monitoring Device display output; Optional WinCrimp statistical software for visual force-time-table on PC and statistical analysis for evaluation with download possibility to Microsoft® Excel software
Safety IP20
Interfaces Rs 232
Options Multiple devices in combination with crimp force monitor and crimp height measurements device via WinCrimp software with either RS232 or TCP/IP.
Dimensions (L x W x H) 180 x 130 x 380 mm (7“ x 5“ x 15“)
Weight 8 kg (18 Ibs.)
CE-Conformity The PullTester 26 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Close X

PullTester 27

Pull Testing Machine


Schleuniger's PullTester 27 is a dual-range, motorized benchtop device designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range of wire than single-range pull test devices. The PullTester 27 is specially suited for quality assurance in a production environment.

» Speed controlled motor for consistent pull rates
» Simple LCD display for easy programming & read out
» Repeatable & accurate data
» Dual-range for improved accuracy over a wider range of wires
» RS 232 interface for curve analysis & statistics with optional WinCrimp PC software
Technical Specifications
Measuring Range Standard: 2,000 / 5,000 N (440 / 1100 lbs.)
Special: 5,000 / 10,000 N (1100 / 2200 lbs.)
Other combinations possible
Units of Measure N, Kp, lbs.
Display Upper: LCD 6-digit for force readings
Lower: LCD 4-line for programming and operation
Applied Force Accuracy 0.2% of full scale
Stroke Max. 80 mm (3.14”)
Pulling Speed 2 speeds: 50, or 100 mm/min.
(1.97 or 3.94”/min.)
Pulling Modes Pull + Break
Monitoring Device display output;
Optional basic WinCrimp software for visual
force-time-table on PC for evaluation with download possibility to
Microsoft® Excel software.
Safety IP 20
Interfaces RS 232
Dimensions (L x W x H) 640 x 400 x 300 mm (25 x 16 x 12”)
Weight aprrox. 45 kg (101 lbs.)
CE-Conformity The PullTester 27 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Close X

PullTester 28

Pull Testing Machine


Schleuniger's PullTester 28 is a dual-range, motorized benchtop device designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range of wire than single-range pull test devices. The PullTester 28 is specially suited for quality assurance in a production environment.

» Speed controlled motor provides extremely consistent readings
» 3 pulling modes for destructive & non-destructive tests
» Simple LCD display for easy programming and read out
» Standard RS 232 interface for curve analysis and downloading test data
» Networking capabilities

Technical Specifications
Measuring Range Standard: 2,000 / 5,000 N (440 / 1100 lbs.)
Special: 5,000 / 10,000 N (1100 / 2200 lbs.)
Other combinations possible
Units of Measure N, Kp, lbs.
Display Upper: LCD 6-digit for force readings
Lower: LCD 4-line for programming and operation
Applied Force Accuracy 0.2% of full scale
Stroke Max. 80 mm (3.14”)
Pulling Speed 4 speeds:
50, 75, 100 mm/min. or high speed
(1.97, 2.95, 3.94”/min. or high speed)
Pulling Modes Pull + Break
Measured-Value Memory Up to 48 jobs with 50 measurements (2400 measurements)
Monitoring Device display output; Optional WinCrimp statistical software for visual force-time-table on PC and statistical analysis for evaluation with download possibility to Microsoft® Excel software.
Safety IP 20
Interfaces RS 232
Dimensions (L x W x H) 640 x 400 x 300 mm (25” x 16” x 12”)
Weight approx. 45 kg (101 lbs.)
CE-Conformity The PullTester 28 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.