Process Modules

Overview

The C1340 crimp module for fully automatic wire processing machines ensures low reject rates through CFA+/CFA crimp force monitoring and high productivity thanks to short changeover times.

The C1340 crimp module convinces with its high precision. The clear operation on the touch display and HMI make the application simple and easy to understand. The crimp height can be adjusted manually on the tool. The asynchronous motor ensures high repetition accuracy. The module is up-to-date in terms of efficiency: An optimized cycle time of 220ms (depending on the setting) is possible. Wire cross-sections of 0.125 to 6 mm² can be crimped with high accuracy and a maximum crimp force of 22 kN. Production downtimes can be avoided through the CFA+/CFA crimp force monitoring.

Features

Precise processing thanks to crimp force monitoring

The CFA+ crimp force monitoring reduces waste, prevents unnecessary wear and saves costs. Statistical data also supports the evaluation of production .

Perfectly illuminated work area

The integrated LED lighting guides the operator through the various work zones on the crimp module and indicates focal points and hazards.

Innovative operation on the crimp module

A new line can be retrieved directly via the central operator unit. The wire can then be precisely set up to the process position using four positioning buttons.

Technical Data

C1340SPECIFICATIONS
Specification name	Specification value
Wire cross section min.	0,125 mm²
Wire cross section max.	6.0 mm²
Crimp force max.	22 kN
Stroke programmable in 1mm/0.04 inch steps min.	10 mm
Stroke programmable in 1mm/0.04 inch steps max.	40 mm
Crimp force monitoring	CFA / CFA+
Height of wire line, standard foot	270 mm
Setting range for wire line max.	25 mm
Shut height	135.8 mm
Shut height adjustment range	+5/-3 mm
Communication	EtherCAT bus
Attachment of crimp applicator	Quick clamping device
Number of reference crimps	1 teach-in crimp
Electrical connection	3×480 V nominal (3×440–530 V) 50/60 Hz 3×400 V nominal (3×360–440 V) 50/60 Hz 1×230 V nominal (1×180–250 V) 50/60 Hz
Low voltage	24VDC max. 2A
Fuse protection	1x230 VAC (180–250 VAC) size of automatic circuit breaker type B min. 6 A 3x400 VAC (360–530 VAC) size of automatic circuit breaker type B min. 4 A 3×208 VAC (360–530 VAC) size of automatic circuit breaker type B min. 6 A
Compressed-air connection	5–8 bar
Operation outside the recommended operating pressure	Non-compliance with the recommended operating pressure can restrict the proper functioning of peripheral devices. Please also observe the technical data for peripheral devices.
Weight	96 kg
Length	220 mm
Width	550 mm
Height	950 mm
Interfaces	M-Link (terminal feed, terminal end recognition, material change detection), terminal strip chopper, air feed set
Hard, tough wires	In the case of extremely hard, ductile or thick-stranded wires, processing might not be possible even within the cross section range. In case of doubt, Komax will be happy to provide processing samples of your wires.

Downloads

C1340