CableCoiler 1450

Coiling Machine

Overview

The CableCoiler 1450 is a single pan coiling system that is used to coil wire, cable or tubing. It features a rotary design with moveable pins to adjust for different coiling diameters. Another unique feature of this design is the easy unloading scheme, using retracting coiling disc with and an automatic safety cover lift. The machine is very versatile and can function in one of two different operating modes:

Coil loose rings only – for efficient offline coiling of precut materials
Auto coil of loose rings– as an integrated post processing accessory for use with the cut & strip machines.

Features

Cable diameter is up to 16 mm (0.63”)

Technical Data

Raw Material Diameter	Up to 16 mm (0.63”)
Workpiece Length	Minimum 1,500 mm (59”)
Coil Diameter	Inner Diameter 100 – 330 mm (4.0 – 13.0”) Outer Diameter Up to 330 mm (13.0”)
Coil Weight	Maximum 40 kg (88 lbs)
Coil Height	Maximum 120 mm (4.7”)
Coiling Speed	Offline: 1.5 – 4.8 m/s (4.9 – 15.7 ft./s) depending on coil diameter Auto coil: Synchronized with process machine
Memory Capacity	Up to 1,000 jobs
Interfaces	SMI standard (I/O signals and speed information), Emergency Stop
Power Supply	100/115 VAC, 60 Hz, 230/240 VAC, 50 Hz, 1000 VA
Compressed Air Connection	6 bar (90 psi)
Weight	120 kg (266 lbs)
Dimensions (L x W x H)	610 x 700 x 1,400 mm (24 x 28 x 56“)
CE-Conformity	The CableCoiler 1450 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note	Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

Downloads

CableCoiler 1450 Catalogue