CoaxCenter 6000

Unbeatable Quality in Micro-Coaxial and Coaxial Cable Processing

Overview

CoaxCenter 6000 is a fully automatic machine for processing micro-coaxial and coaxial cables as well as single conductor wires.

Unbeatable precision:
Don‘t waste time and money on inaccurate equipment. To Be Precise is our motto and precision is our business.

Monitors automatically:
The QCam 360 automatically monitors the stripping quality. This eliminates the need for time-consuming manual post-production monitoring processes.

Flexible:
Depending on the application, the CoaxCenter 6000 can be equipped with various processing stations.

High production output:
Short changeover times. Fast and simple machine set-up. Simultaneous
processing of both cable ends.

Features

Material

Cable
Coaxial Cable
Conformable Cable
Corrugated Cable
Discrete Wire
Kapton
Low Loss Cable
Micro-Coaxial Cable
PUR
PVC
Rubber
Semi-Rigid Cable
Single Conductor Cable
Single Wire
Solid Wire
Special Designed Terminals
Stranded Wire
Teflon®
Tefzel®
Wire
Wire with Special Isolation

Technical Data

Raw Material Diameter	Maximum 5.5 mm (0.21")
Conductor Cross-Section	0.005 mm² (40 AWG)
Workpiece Length	Minimum 15 mm (0.59") + stripping lengths Maximum 1,000 mm (39.4"), longer cable length with active wire stacker possible*
Strip Length	Minimum 0.1 mm (0.004“) Maximum Side 1: 58 mm (2.28") Maximum Side 2: 38 mm (1.49")
Strip Length Tolerance	+/– 50 μm (depending on cable type and programming)
Measuring Precision	10 μm
Production Rate	Cut & Strip: 1,200 pcs/h (100 mm (3.93") long, 3-step strip on both sides) Cut, Strip & Quality: 1000 pcs/h (100 mm (3.93") long, 3-step strip on both sides)
Dimensions (L x W x H)	1,300 x 800 / 900 x 1,400 mm (51.18 x 31.49 / 35.43 x 55.11") (2,200 mm (86.61") with lifted cover)
Dimensions (L x W x H) incl. WireStacker and WireStraightener	2,000 x 800 / 900 x 1,400 mm (78.74 x 31.49 / 35.43 x 55.11") (2,200 mm (86.61") with lifted cover)
Weight	407 kg (897 lbs.)
Power Supply	100/120 VAC, 200/240 VAC, 800 VA, 50/60Hz
Compressed Air Connection	6 bar (87 psi) non-oiled, dried and filtered compressed air Average 65 l/min, maximum 400 l/min Air hose 12/9 mm, max air hose length 10 meter
CE-Conformity	The CoaxCenter 6000 complies fully with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note	Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. ¹⁾
¹⁾*1) depends on cable diameter and stiffness of the cable

Downloads

CoaxCenter 6000 catalogue