Industry Leaders
PCB Assembly and Wire Processing Equipments

CrimpCenter ACS

Coil-Binding System for CrimpCenter

CrimpCenter ACS

The CrimpCenter ACS (AutoCoiling System) is built on the 6-series platform. The auto-coiling function eliminates the need for extension conveyors and significantly reduces the floor space required for long-wire applications. The system will automatically coil, bind and batch long wires during production. Binding is accomplished with tape that can be easily removed for downstream production steps.

  • High performance with minimal space requirements
  • Excellent length accuracy due to servo motor and encoder combination
  • Handles single wire applications with or without seals or terminals on either end
  • Simple operation and set-up via the CrimpCenter EASY software and touchscreen interface

The CrimpCenter ACS does not use the standard conveyor with extension but automatically coils long wires. After processing the leading wire end on side 1 of the CrimpCenter, e.g. sealing and crimping, a linear gripper guides the wire from the cutting head and transfers it to the gripper of the coiling head. The subsequent feeding/coiling process is controlled by synchronized, high performance servo motors. After processing the trailing wire ends on side 2 the wire will be tied with adhesive tape by the integrated binding unit and collected on the stacking unit. The top of the stacking unit conveniently rotates so coils can be removed safely and easily while the machine is in production.

Workpiece Length

From approx. 4 m to more than 30 m (13.1 ft. – 98.4 ft.)
(depending on cable cross-section, sample inspection necessary)

Conductor Cross-Section

0.35 – 2.5 mm² (22 – 13 AWG)

Feed Rate

Maximum 9 m/s (29.5 ft./s) (depends on wire and wire packaging)

Dimensions (L x W x H)

1000 x 720 x 1700 mm (39.4 x 28.4 x 66.0”)


Approx. 175 kg (385 Ibs.)


The CrimpCenter ACS fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

Need more Information?
Call (91) 9595525010 or e-mail

PCB Assembly Machines

Wire Harnessing Machines

©2018 EMST Marketing Pvt. Ltd.
Designed & Developed by threeDigits