Industry Leaders
PCB Assembly and Wire Processing Equipments

Kappa 315

Kappa 315

The Kappa 315 cutting and stripping machine processes wires with a cross section of 0.05 mm² to 10 mm² thanks to the sturdy blade holder and various blade shapes.

The Kappa 315 has a strong and robust cutting head for processing wires with a conductor cross-section of 0.05 mm² to 10 mm². A wide variety of blades and wire guides can be changed without tools. The TopTouch user interface is designed for quick and easy programming of the machine. Programs can be generated and saved with just a few clicks. If it is necessary to connect the Kappa 310 to the company network, to extend it with feed, wire deposit systems, or if labeling on the wires is necessary, the Kappa machine can be expanded with options that make this possible.

 

KAPPA 315SPECIFICATIONS
Specification nameSpecification value
Wire length, processing on both sides min.1 mm
Wire length max.800000 mm
Strip lengths, full stripping side 1 max.115 mm
Strip lengths, full stripping side 2 max.40 mm
Strip lengths, partial stripping/multiple stripping max.999.9 mm
Wire outer diameter max.10 mm
Flat cable width max.12 mm
Automatic conductor detectorno
Wire cross section min.0.05 mm²
Wire cross section max.10 mm²
Pieces max.99999
Wire draw-in speed max.4 m/s
Sequence processing (number of wires)with TopWin
Length accuracyRepetition accuracy: ± (0.2% + 1.0)
Drive systemSingle rollers
Wire guide, side 1Swivel guide
Wire guide, side 2Fixed guide
Noise level< 80 dB
Wire protection/ground2 x 5 × 20 mm 6.3 A
Nominal output (average)135 VA
Compressed-air connection5 – 8 bar
Operating pressure6 bar
Weight46 kg
Dimensions/length465 mm
Dimensions/width460 mm
Dimensions/height385 mm
Installation locationLevel, stable and vibration-free support surface (e.g., Komax production table)
Size of production table (L x W) min630 x 690 mm
Load capacity of production table min.75 kg
Humidity, non-condensing90 %
Temperature operation10 – 40 °C
Processing outside the specificationsProcessing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires.
Hard, tough wiresIn the case of extremely hard, tough wires, processing may not be possible even within the cross section range. In case of doubt, Komax will be happy to provide processing samples of your wires.
Need more Information?
Call (91) 9595525010 or e-mail contact@emstonline.com

PCB Assembly Machines

Wire Harnessing Machines

©2018 EMST Marketing Pvt. Ltd.
Designed & Developed by threeDigits