Kappa 330 DH

Overview

The Kappa 330 cutting and stripping machine is suitable for processing a wide range of wires as a single head and optionally as a dual head with a double blade cutting head.

The Kappa 330 is available as a single head or dual head, whereby the single head can be converted into a dual head. Thanks to the dual head, the machine can process a wide variety of wires with up to 3 cutting blades (slitting, cutting and stripping blades) used simultaneously. The Kappa 330 processes wires from 0.22 to 35 mm² (AWG 24 – 2) and a maximum diameter of 16 mm. The machine can also easily handle ribbon cables up to 40 mm wide. The dual head version can also strip several inner conductors when equipped with the separation unit. In addition, the Kappa 330 can be expanded with options that make it possible to connect the machine to the company network and to expand it with feed, wire deposit or labeling systems.

Features

Single head cutting unit with innovative sensor technology

The single head cutting unit covers a wide range of processing areas. The integrated sensors serve as a set-up aid and for process monitoring.

Optional dual head for up to three process steps in one

Dual head with additional separation unit optional

The conductors of the patented roller system are gently pushed apart. This means that several conductors (including twisted conductors) can be separated quickly and gently.

Technical Data

KAPPA 330 DHSPECIFICATIONS
Specification name	Specification value
Wire length, processing on both sides min.	1 mm
Wire length max.	800000 mm
Strip lengths, full stripping side 1 max.	180 mm
Strip lengths, full stripping side 2 max.	50 mm
Strip lengths, partial stripping/multiple stripping max.	999.9 mm
Wire outer diameter max.	16 mm
Flat cable width max.	40 mm
Automatic conductor detector	Optional
Wire cross section min.	0.22 mm²
Wire cross section max.	35 mm²
Pieces max.	99999
Wire draw-in speed max.	4 m/s
Sequence processing (number of wires)	with TopWin
Length accuracy	Repetition accuracy: ± (0.2% + 1.0)
Drive system	Double rollers or belt drive
Wire guide, side 1	Swivel guide
Wire guide, side 2	Fixed guide / split wire guide
Noise level	< 80 dB
Electrical connection	115/230VAC±10%, 50/60Hz, 520VA
Wire protection/ground	2 x 5 × 20 mm 6.3 A
Nominal output (average)	160 VA
Compressed-air connection	5-8 bar
Compressed-air quality	oiled or unoiled, not alternating
Air consumption	10 l/min
Operating pressure	6 bar
Weight	60 kg
Dimensions/length	650 mm
Dimensions/width	690 mm
Dimensions/height	380 mm
Installation location	Level, stable and vibration-free support surface (e.g., Komax production table)
Size of production table (L x W) min	630 x 690 mm
Load capacity of production table min.	60 kg
Humidity, non-condensing	90 %
Temperature operation	10-40 °C
Processing outside the specifications	Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires.
Hard, tough wires	In the case of extremely hard, tough wires, processing may not be possible even within the cross section range. In case of doubt, Komax will be happy to provide processing samples of your wires.

Downloads

Kappa 330 dh

Need more Information?

Call (91) 9595525010 or e-mail contact@emstonline.com

PCB Assembly Machines

Wire Harnessing Machines

Designed & Developed by threeDigits