Industry Leaders
PCB Assembly and Wire Processing Equipments

Kappa 350

Cut and Strip

Kappa 350

The Kappa 350 cutting and stripping machine processes round conductors up to 120 mm² and a maximum outer diameter of 35 mm in high quality thanks to sophisticated sensors .

Kappa 350 is a powerhouse: The cutting and stripping machine is extremely cost-effective thanks to a strong belt or optional roller drive with a wire transport speed of 4.8 m/s, accurate repeatability, and the cutting head with two blade positions. Innovative sensors support the set-up work and take over quality control during operation for minimal cutting losses. The standardized connections make it easy to integrate additional modules such as wire feed systems, printers, active trays, etc. TopWin can be used to also produce complete parts lists, sequences as a multilead set or as a wire harness. The software also enables wire labeling, connection to the company network and printing of goods despatch notes.

KAPPA 350SPECIFICATIONS
Specification nameSpecification value
Wire length, processing on both sides min.1 mm
Wire length max.800000 mm
Strip lengths, full stripping side 1 max.290 mm
Strip lengths, full stripping side 2 max.150 mm
Strip lengths, partial stripping/multiple stripping max.999.9 mm
Wire outer diameter max.35 mm
Automatic conductor detectorOptional
Wire cross section min.2.5 mm²
Wire cross section max.120 mm²
Pieces max.99999
Wire draw-in speed max.4.8 m/s
Sequence processing (number of wires)with TopWin
Length accuracyRepetition accuracy: ± (0.2% + 1.0)
Drive systemDouble rollers or belt drive
Wire guide, side 1Swivel guide
Wire guide, side 2Fixed guide
Noise level< 80 dB
Electrical connection115/230VAC±10%, 50/60Hz, 650VA
Wire protection/ground16
Nominal output (average)360 VA
Compressed-air connection5-8 bar
Compressed-air qualityoiled or unoiled, not alternating
Air consumption20 l/min
Operating pressure6 bar
Weight275 kg
Dimensions/length1090 mm
Dimensions/width890 mm
Dimensions/height1435 mm
Installation locationLevel, stable and vibration-free support surface (e.g., Komax production table)
Size of production table (L x W) min630 x 690 mm
Load capacity of production table min.75 kg
Humidity, non-condensing90 %
Temperature operation10-40 °C
Processing outside the specificationsProcessing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires.
Hard, tough wiresIn the case of extremely hard, tough wires, processing may not be possible even within the cross section range. In case of doubt, Komax will be happy to provide processing samples of your wires.
Need more Information?
Call (91) 9595525010 or e-mail contact@emstonline.com

PCB Assembly Machines

Wire Harnessing Machines

©2018 EMST Marketing Pvt. Ltd.
Designed & Developed by threeDigits