Industry Leaders
PCB Assembly and Wire Processing Equipments

KT 645

Dielectric strength tests up to 3300 VAC / 4670 VDC

KT 645

Perfect for automated production lines.

■ Precise measurement electronics for the measurement of resistances and capacitances
■ 3 x USB and network for easy data handling
■ Up to 27 digital I/Os for control
■ All standard field bus systems available*
■ Prepared for pin-length measurement
■ Voltage measurement*
■ LCR measuring bridge*
■ Easy handling in stand-alone operation
■ Automatic learning of golden samples
■ Loading and saving of test programs
■ Extensive result reporting
■ Operating language selectable
■ Up to 512 test points
■ Insulation test up to 4670 VDC*
■ Dielectric strength tests up to 3300 VAC / 4670 VDC*
■ High current test up to 2 ADC*
■ Continuity test, short circuit test and component test
■ Microsoft® network interface
■ USB 2.0 interfaces
■ 2 GB storage for test programs and result data (expandable)
■ Remote maintenance via network

Technical features KT 645

Test points

max. 512

Low voltage test DC

Test voltage

max. 25 V (optional 250 V)

Test current

max. 25 mA (optional 2 A)

Threshold continuity test

0.5 Ohm – 1 kOhm (optional four-wire measurement from 1 mOhm)

Threshold short-circuit test

20 kOhm – 1 MOhm (optional up to 100 MOhm)

Component test

Resistors: 1 Ohm – 1 MOhm (optional up to 100 MOhm)

Capacitors: 10 nF – 20 mF (optional from 10 pF)

Diodes, Zener diodes, LEDs, suppressor diodes

Dielectric strength test AC

Test voltage

50 – max. 3300 V

Test current

max. 30 mA

Dielectric strength test DC

Test voltage

50 – max. 4670 V

Test current

max. 10 mA

Insulation test DC (optional)

Test voltage

max. 4670 V

Threshold

100 kOhm – 5 GOhm (depending on test voltage)

General

Power supply

230 VAC / 50 Hz or 110 VAC / 60 Hz

Interfaces

3 x digital I/Os (Extern Interface, expandable up to 27 I/Os) for control, foot switch and signal lamp

1 x serial interface RS232 for control and printer

3 x USB 2.0 (1 x at the front-side) for data media, barcode scanner, keyboard and printer

Network / safety loop and warning lamp / pin number probe

Optional control via all common field bus systems

Dimensions (W x H x D, approx.)

555 mm x 650 mm x 600 mm

Scope of delivery

KT 645, main cable, mating connector and service connector for safety loop, pin number probe, USB flash drive with NT Control LT and documentation in PDF format

 

Need more Information?
Call (91) 9595525010 or e-mail contact@emstonline.com

PCB Assembly Machines

Wire Harnessing Machines

©2018 EMST Marketing Pvt. Ltd.
Designed & Developed by threeDigits