Spot Taping

Overview

The pneumatic bundler KTB P, a versatile machine for spot taping, marking, finishing, and insulating, is assembled according to your requirements for tape width and bundle diameter.

The KTB 50 P compressed air-driven spot taping machine offers full power without electricity for the tying of wire harnesses and the fixing and marking of cables. The efficient, low-wear cutting blade system, the sturdy design, and the pneumatic drive make this a low-maintenance machine. In addition, up to four layers of adhesive tape can be set, and material costs of up to 80% can be saved compared to shrink tubing or caps. The machine requires a minimum of space due to the compactly installed components. The pneumatic connection is located directly on the device, eliminating the need for a separate control cabinet. All adjustments are made directly on the machine, facilitating operation and maintenance.

Features

No power connection required

KTB 50 E Plus is a versatile and robust machine with a purely pneumatic operation. The air pressure connection is located directly on the unit.

Dependable and efficient spot taping technology

The pneumatic bundler is characterized by speed and reliability. It reduces production time by up to 50% compared to manual processing.

Minimal maintenance required

KTB P is equipped with a self-oiling blade and has a low-maintenance design. All maintenance activities can be carried out by operators with limited technical knowledge.

Flexible as a standalone or for fully automated processes

Due to its efficiency and reliability, the pneumatic bundler is ideally suited for integration into fully automated processes.

Technical Data

KTB 50 PSPECIFICATIONS
Specification name	Specification value
Machine type	Benchtop machine
Current	No
Control box	No
Pneumatics	Yes
Total recommended space requirement (width x depth)	550 x 1420 mm
Width	350 mm
Dimensions/height	550 mm
Dimensions/depth	420 mm
Weight	15 kg
Recommended operating pressure ±0.5bar/7.25psi	6 bar
Number of tape layers/bundling, min.	einstellbar über Bandlänge
Number of tape layers/bundling, max.	einstellbar über Bandlänge
Bundle diameter, min.	KTB 19 P: 3 mm / KTB 38 P: 3 mm / KTB 50 P: 3 mm / KTB 40/30 P: 15 mm
Bundle diameter, max.	KTB 19 P: 16 mm / KTB 38 P: 16 mm / KTB 50 P: 16 mm / KTB 40/30 P: 35 mm
Diameter detection	No
Integration into welding table	No
Device interface (USB)	No
Network connection	No
MES capable	No
Tape end sensor	No
Ejector	No
Oiler (for the blade)	Yes
Tape pull-off	Yes
Tape pull-off support	No
Tape width, min.	KTB19P: 9 mm / KTB 38 P: 19 mm / KTB 50 P: 38 mm / KTB 40/30 P: 19 mm
Tape width, max.	KTB19P: 19 mm / KTB 38 P: 38 mm / KTB 50 P: 50 mm / KTB 40/30 P: 30 mm
Tape roller outer diameter, max.	160 mm
Ambient temperature max.	40 °C
Ambient temperature min.	10 °C
Humidity, non-condensing	5 - 95 %

Downloads

Ktb 50 p