Spot taping

Overview

The KTB E Endsplice electric bundle machine, based on the proven technology of the KTB E Plus, is used for end-splice insulation and fixing of pre-stripped cable ends

Easy handling – high performance: The KTB E Endsplice was specially developed for insulating end splices. Based on the tried-and-tested technology of the KTB E PLUS, it ensures short process times and minimal tape usage. As soon as the cable is introduced into the machine, its thickness is detected automatically. The KTB E Endsplice can then dispense the optimum length of tape. If another wire set is inserted, the machine does not have to be set up again. It is also possible to program the length of tape and the number of times the tape needs to be wrapped around the splice. This means that the KTB E Endsplice can ensure a consistently high quality standard and is indispensable in the professional production of cables for the automotive industry.

Features

Highest quality and process reliability

Automatic diameter detection reduces operator influence. Efficient and stress-free handling of cables and welded joints. "

The sleeve ensures precise positioning

Simple and reliable positioning: A sleeve serves as a limit stop to make sure that the tape is always applied at the right position.

Time savings thanks to short cycle times

Up to 50% savings in production time compared to manual production. Handling is simple, thanks to automated process steps.

Cost-efficient with high material savings

Up to 80% less material costs compared to heat shrink tubing or caps. Tape consumption is calculable thanks to the programmable number of windings.

Technical Data

KTB E ENDSPLICESPECIFICATIONS
Specification name	Specification value
Machine type	Benchtop machine
Screen diagonal	145 mm
Current	Yes
Electrical connection	1×230V, 50/60Hz (range 180 - 250 V); 1×115V, 50/60Hz
Control box	integrated
Pneumatics	Yes
Total recommended space requirement (width x depth)	1430 x 1670 mm
Control voltage	24 V
Fuse protection	16 A
Connection power	1200 W
Width	430 mm
Dimensions/height	475 mm
Dimensions/depth	670 mm
Weight	45 kg
Recommended operating pressure ±0.5bar/7.25psi	6 bar
Number of tape layers/bundling, min.	2
Number of tape layers/bundling, max.	3
Adjustable gripper force	No
Transverse tension	No
Adjustable transverse tension	No
Diameter detection	Yes
Integration into welding table	No
Device interface (USB)	Yes
Network connection	Yes
MES capable	No
Tape end sensor	optional
Ejector	No
Input for barcode scanner	No
Oiler (for the blade)	Yes
Positioning limit stop	No
Tape pull-off	No
Tape pull-off support	No
Taping diameter, min.	2 mm
Taping diameter, max.	10 mm
Tape width, min.	38 mm
Tape width, max.	50 mm
Tape detection sensor	No
Tape roller outer diameter, max.	180 mm
Ambient temperature max.	40 °C
Ambient temperature min.	10 °C
Humidity, non-condensing	5 - 95 %

Downloads

KTB E ENDSPLICE

Ktb e endsplice