Mira 230 Q

Wire Stripper

Overview

The Mira 230 Q enables absolutely precise processing of a wide range of wire specifications with the electronic automatic conductor detector ACD.

The Mira 230 and Mira 230 Q wire strippers allow you to process a wide range of wire specifications. They are particularly suitable for processing multi-core wires due to their directly consecutive work steps for stripping and cutting without changing the program. Each wire and sequence can be stored in the library and reproduced at any time. The electronic automatic conductor detector ACD checks for possible contact between the blade and conductor and thus prevents undetected faulty wires. ACD technology is also used as an automatic adjustment aid in which the incision diameters are adapted to the conductor diameter.

Features

Easy to transport thanks to the ergonomic carrying handle
The convenient carrying handle on the upper part of the housing, makes the portable Mira 230 wire stripper easy to transport– like all Komax wire strippers.
Full quality control with ACD incision monitoring
The ACD incision monitoring system of the Mira 230 Q detects and signals the slightest contact between the blade and strands for fully-automatic quality control.
Ergonomic working position thanks to hand rest and matching draw-in
A comfortable, mobile hand rest is included with the Mira 230. This and the low-lying wire line protect the operator’s posture.
Built-in accessory drawer on the back of the device
The accessory drawer on the back can be opened by pressing and neatly stows important tools for the Mira 230 so that they are readily accessible.

Technical Data

**MIRA 230 Q SPECIFICATIONS**
Specification name	Specification value
Wire outer diameter max.	6.5 mm
Strip lengths, full stripping max.	46 mm
Increment of strip length	0.01 mm
Insertion depth with standard grippers min.	12 mm
Insertion depth with optional thin grippers min.	9 mm
Number of entries in the article library	1500
Number of entries in sequence library	1000
Strip lengths, full stripping min.	1.5 mm
Strip lengths, partial stripping min.	0.01 mm
Strip lengths, partial stripping max.	46 mm
Cutting length for wire tip min.	0.01 mm
Cutting length for wire tip max.	46 mm
Max. conductor diameter for cutting	2 mm
Incision diameter increment	0.01 mm
Wire cross section min.	0.03 mm²
Wire cross section max.	8 mm²
Gripping force	Programmable
Piece output max.	2000 pcs/h
Sequence function/number of steps	100
Noise level	< 80 dB
Electrical connection	100–240 V AC, 120 VA
Compressed-air connection	5 – 7 bar
Weight	11 kg
Dimensions/length	141 mm
Dimensions/width	463 mm
Dimensions/height	290 mm
Temperature operation	5 – 40 °C
Processing outside the specifications	Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires.
Cycle time	0.3 sec
Cycle time depending on	for conductor cross-section 0.75 mm2, strip length 10mm, pull-off length 5mm
Data interface	USB interface for data backup, input for barcode scanner, mouse. Preparation for TCP/IP network connection
Input for barcode scanner	Data input mode: Configure scanner for “Keyboard wedge” or “USB keyboard wedge”. No driver needs to be installed. The readable code types depend on the barcode scanner model.

Downloads

MIRA 230 Q