Mira 340 Q

Wire Stripper

Overview

The Mira 340 Q programmable wire stripper processes wires with an external diameter of up to 8 mm and a strip length of 72 mm, including electronic automatic conductor detector ACD.

The Mira 340 and 340 Q work precisely and with high stripping quality thanks to the rotating cutting unit with 4X blades. The patented electronic automatic conductor detector ACD ensures quality assurance during cutting and/or pulling off by detecting the slightest contact between the blade and conductor. In addition, multi-core wires and multi-layer insulation can also be efficiently stripped with sequence processing in the Mira 340 and 340 Q. The units are operated via the intuitive touch screen. The articles can be read error-free using the barcode and recorded in the article library. This ensures efficiency and repeatability.

Features

Precise stripping with a rotation cut
The rotation cut with 4X blades strips with greater precision and provides a smoother cutting surface than V blades.

Mira 340 Q with ACD incision monitoring
ACD detects and signals the slightest contact between the blade and conductor and is an important monitoring function, especially for difficult wires.

Easy article selection with barcode scanner
Selecting articles with barcode scanning not only saves time but also prevents errors that can occur during manual input.

Processing of a wide variety of wire types
The Mira 340 processes a wide range of wire types and sophisticated insulation, like tough Teflon®, flexible silicone, and fiber braiding.

Sharp stripping of wires and cables
The Mira 340 can also be used for multi-stage stripping with full and partial stripping, offset stripping, short cuts on multi-core or multi-layer wires.

Technical Data

MIRA 340 QSPECIFICATIONS
Specification name	Specification value
Wire outer diameter max.	8 mm
Strip lengths, full stripping max.	72 mm
Increment of strip length	0.01 mm
Insertion depth with standard grippers min.	15 mm
Number of entries in the article library	3000
Number of entries in sequence library	1000
Strip lengths, full stripping min.	0.01 mm
Strip lengths, partial stripping min.	0.01 mm
Strip lengths, partial stripping max.	29 mm
Cutting length for wire tip min.	0.01 mm
Cutting length for wire tip max.	72 mm
Max. conductor diameter for cutting	2 mm
Blade	4x
Incision diameter increment	0.01 mm
Wire cross section min.	0.013 mm²
Wire cross section max.	16 mm²
Gripping force	Programmable
Sequence function/number of steps	100
Noise level	< 80 dB
Electrical connection	100–240 V AC, 120 VA
Compressed-air connection	6 – 8 bar
Compressed-air quality	Dry, filtered (10 μm), oil-free
Weight	11 kg
Dimensions/length	141 mm
Dimensions/width	473 mm
Dimensions/height	290 mm
Temperature operation	5 – 40 °C
Processing outside the specifications	Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires.
Cycle time	2.3 sec
Data interface	USB interface for data backup, input for barcode scanner. Ready for connection to TCP/IP network connection
Input for barcode scanner	Data input mode: Configure scanner for “Keyboard wedge” or “USB keyboard wedge”. No driver needs to be installed. The readable code types depend on the barcode scanner model.
User interface	5-color touchscreen, dial wheel
Trigger	Sensor, touchscreen, foot-operated switch (optional)

Downloads

MIRA 340 Q