Industry Leaders
PCB Assembly and Wire Processing Equipments

NT 600

Modular Wiring Tester

NT 600

■ The NT 600 is the ideal entry-level tester – easy expandable for future test requirements
■ Low start-up costs
■ Easy expandable*:
▪ Additional measurement electronics
▪ LCR measurement bridge
▪ Test point expansion via test point units
▪ Four-wire measurement from 1 mOhm
▪ Insulation tests up to 10 GOhm
■ Test table support
■ The demands of the following test standards are complied with:
   IPC/WHMA-A-620, MIL-STD-202G,
   NASA-STD 8739.4A, MIL-HDBK-83575,
   MIL-STD-1344A, MIL-C-45224D

Technical features NT 600

Test points

max. 1024 in the base unit (expandable with test point units up to 5120 test points)

Low voltage test DC

Test voltage

max. 25 V (optional up to 250 V)

Test current

max. 25 mA (optional up to 100 mA)

Threshold continuity test

1 Ohm – 1 kOhm

Threshold short-circuit test

20 kOhm – 1 MOhm (optional up to 100 MOhm)

Component test

Resistors: 1 Ohm – 1 MOhm (optional up to 100 MOhm)

Capacitors: 10 nF – 20 mF (optional from 10 pF)

Diodes, Zener diodes, LEDs, optional: inductances, impedances, varistors (max. 1300 VDC)

High current test DC (optional)

Test voltage

max. 22 V

Test current

max. 2 A (optional 10 A pulsed)

Threshold continuity test

0,5 Ohm – 1 kOhm


Four-wire measurement from 1 mOhm / Recognition of short time interruptions ≥ 1 μs

High voltage test DC (optional)

Test voltage

40 – 1500 V

Insulation test

500 kOhm – 2 GOhm (optional up to 10 GOhm)

Breakdown test

Fast recognition of voltage breakdowns (arc detection)

Dielectric strength test AC/DC (optional)

Test voltage / test current AC

100 – 1060 V / max. 3 mA, safety current limited according to EN 50191 (optional max. 6 mA)

Test voltage / test current DC

40 – 1500 V / max. 3 mA, safety current limited according to EN 50191 (optional max. 6 mA)

Function test (optional)

The NT 600 can be expanded, so that the test of relays, time relays, contactors, indication lamps, function procedures etc. can be carried out automatically. Therefore stimulus cards and stimulus sources are available beside powerful software tools and editors in NT Control.



Interface for expansion units

Extern interface with 3 opto-coupled inputs and 3 potential free outputs (expandable)

Serial interfaces RS232 / USB 2.0


Pin number probe

Dimensions (W x H x D, approx.)

Base unit: 450 mm x 275 mm x 395 mm Test point unit 0ZE31: 450 mm x 150 mm x 395 mm

Scope of delivery base unit

NT 600, main cable, pin number probe, USB flash drive with NT Control and documentation in PDF format, mating connector and service connector for safety loop


Need more Information?
Call (91) 9595525010 or e-mail

PCB Assembly Machines

Wire Harnessing Machines

©2018 EMST Marketing Pvt. Ltd.
Designed & Developed by threeDigits