PreFeeder 3200

Prefeeding Machine Puller Type

The belt driven puller feeder type can pull wires and cables from a spool. The system is available with different accumulator systems:

Customer Benefits

Raw Material Diameter	35 mm (1.38”)
Pulling Force	330 N (73 lbf)
Feed Rate	0 – 2.5 m/s (0 – 8.2 ft./s)
Power Supply	100/115 VAC, 60 Hz, 230/240 VAC, 50 Hz, 850 Watt
Compressed Air Connection	6 bar (90 psi)
Accumulator Storage Capacity	1,800 mm (70.8“) with 2 loops or 900 mm (35.4”) with 1 loop, depending on cable stiffness
Weight	150 kg (330 lbs.) Base machine 20 kg (44 lbs.) Inlet Accumulator 20 kg (44 Ibs.) Accumulator speed control 1 10 kg (22 lbs) Loop Limit Control
Dimensions (L x W x H)	710 x 560 x 1,400 mm (28 x 22 x 55”) Base machine 1,400 x 560 x 1,400 mm (55 x 22 x 55”) with Accumulator Speed Control Arm 2,090 x 600 x 1,400 mm (82 x 24 x 55”) with Inlet Accumulator & Accumulator Speed Control 410 x 310 x 1,040 mm (16 x 12 x 41”) Loop Limit Control
CE-Conformity	The PreFeeder 3200 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility
Important Note	Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.