SealLoad 3100

Sealing Station for CrimpCenter

Overview

The seal loading station for the CrimpCenter series conveys and orientates loose weather seals and positions them over previously stripped wires. Suitable for all types of seals, including mini- and hard-shell seals. Optional seal monitoring (SealCheck). Existing SLU 3000 SealKits can be utilized.

Improved cycle time due to optimized mechanism
Tool-less kit changeover and multi coupling
High precision of the seal loading and monitoring
Low energy consumption
Appealing design and ergonomics
Fully integrated with EASY software

Features

All types of seals up to a length of max. 19 mm (0.748”) and outside diameter of 17 mm (0.669”), also mini-, hard-shell and oval seals. Special sizes on request.

Technical Data

Raw Material Diameter	Maximum 6 mm (0.25“)
Seal Diameter	Maximum 17 mm (0.669") Maximum 19 mm (0.78") length (other sizes on request)
Cycle Rate	Approx. 150 ms (without options)
Cycle Time	Approx. 750 ms
Noise Level	<70 dB (A)
Compatibility	SLU + SL SealKits / AdapterKit
Interfaces	Ethernet & I/O (24VDC)
Power Supply	24 VDC, 300 W
Compressed Air Connection	Min. 6 bar (90 psi) compressed air, not oiled, filtered and dry
Dimensions (L x W x H)	650 x 100 x 750 mm (25.6 x 3.9 x 29.5")
CE-Conformity	The SealLoad 3100 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note	Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

Downloads

SealLoad 3100 catalogue