Uni-S Applicators

Universal Crimp Applicators

Overview

The Uni-S is the latest generation crimp applicators for use in both automatic and semi-automatic benchtop crimping machines. Banded terminals of open or closed barrel construction with either metal or plastic carriers can easily be processed.

Economically priced applicators to handle practically all terminal and feed types
Rugged construction and simple set up to ensure long life and high quality results
Includes convenient micro-adjust dials, a 6-digit counter and one additional set of tooling
For use on automatic terminating machines as well as benchtop crimping presses

Features

The Uni-S family of applicators are designed for use with side- and end-feed, banded terminals of open or closed barrel construction. Handling and set up is as easy as ever. The Uni-S is suitable for use on automatic wire processing systems as well as on benchtop presses for terminals with either metal, plastic or Mylar tape carrier strips.

Open barrel terminals on metal carrier strips, with or without weather seals
Pre-insulated terminals on plastic or Mylar tape carrier strips
Front, middle or center carrier strips
Insulated end ferrules in strip form
Open barrel end ferrules (clips) in strip form
Wire splice terminals

Technical Data

Feed Type	Mechanical or pneumatic
Stroke	40 and 30 mm (1.57 or 1.18") (Other strokes available on request)
Conductor Cross-Section	0.08 – 6 mm² (28 – 10 AWG)
Terminal Pitch	Minimum: 1 00 (0.04") Maximum: 30 mm (1.18”) (pneumatic feed recommended for 25 mm (1“) or more)
Crimp Height Adjustment	Increment: 0.025 mm (0.001”) Maximum: 1.5 mm (0.06”)
Compressed Air Connection	6 – 8 bar (90 – 110 psi) (pneumatic applicators only)
Weight	5 kg (11 lbs.)
Important Note	Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

Downloads

Uni-S Applicators catalogue