UniCrimp 500 A

Crimping Station for CrimpCenter

Overview

The UniCrimp 500 A is a crimping machine with 5 tons of press forces. It processes both rear- and side-feed banded terminals (open or closed barrel type) for cable cross sections up to 16 mm² (6 AWG).

For processing large cable cross sections up to 16 mm² (6 AWG)
For processing rear- and side-feed banded terminals
Short cycle times
Quick-change applicator base plate
Optional crimp force monitoring

Features

The UniCrimp 500 A is a heavy duty crimping station for use with the CrimpCenter 67 HD16 automatic cut, strip, and terminate machine. For ease of set-up, the UniCrimp 500 A is equipped with a creep mode. This enables the drive mechanism to be moved backwards and forwards slowly, to facilitate visual checking.

Technical Data

Crimping Force	49 kN (5 tons)
Conductor Cross-Section	Up to 16 mm² (6 AWG)
Stroke	40 mm (1.58”)
Shut Height	Standard: 158.38 (6.23“) Optional: 135.78 (5.34“)
Cycle Time	1 s
Power Supply	1 / N / PE AC 115 - 230 V, 50/60 Hz, 16 A
Dimensions (L x W x H)	390 x 550 x 1,290 mm, (15.35 x 21.65 x 50.78”) Without base frame
Weight	197 kg (434 lbs.)
CE-Conformity	The UniCrimp 500 A fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note	Schleuniger recommends that wire samples be submitted in case where there is doubt as to the processing capabilities of a particular machine.

Downloads

UniCrimp 500A catalogue