UniStrip 2300

Wire and cable stripping machine

Overview

The UniStrip 2300 programmable stripping machine strips wires ranging in size from 0.03 – 8 mm² (32 – 8 AWG) and jacketed cables up to 5.5 mm (0.22") in diameter. This innovative machine does not require any mechanical adjustments to process different wire sizes.

SmartDetect – Option for Quality Assurance
Intuitive color touchscreen user interface
LED lighting provides the operator with a clear view
of the entire working area
Very sensitive trigger sensor. Works great for small,
flexible wires
No mechanical adjustments required when changing wire sizes
Barcode scanning function
Wire list processing

Features

The Schleuniger UniStrip 2300 strips wires ranging in size from 0.03 – 8 mm² (32 – 8 AWG) and jacketed cables up to 5.5 mm (0.22") in diameter. This innovative machine does not require any mechanical adjustments to process different wire sizes. Using the color touchscreen, the operator selects the desired wire size from the preprogrammed library and all parameters (cutting diameter, clamping pressure, blade way back, etc.) are automatically set. The operator edits the stripping and pull-off lengths as required and the machine is ready for operation. The UniStrip 2300 begins the stripping process when the wire end touches the trigger sensor. The wire is automatically clamped and the stripping process is performed according to the programmed values. If desired, the program can be saved to internal memory for future use.

Material

Cable
Discrete Wire
Kapton
Multi-conductor Cable
PUR
PVC
Rubber
Single Conductor Cable
Solid Wire
Stranded Wire

Technical Data

Conductor Cross-Section	0.03 – 8 mm² (32 – 8 AWG)*
Raw Material Diameter	Maximum 5.5 mm (0.22")
Diameter Increments	0.01 mm (0.001“)
Strip Length	Minimum 1.5 mm (0.06") Maximum 46 mm (1.81") Stripping length plus pull-off length must be max. 53.4 mm (2.1")
Pull-Off Length	Maximum 26 mm (1.02") Stripping length plus pull-off length must be ≤ 53.4 mm (2.1")
Strip Length Increment	0.1 mm (0.01")
Cycle Time	0.35 s (0.75 mm² (18 AWG) wire, stripping length 10 mm (0.39"), pull-off length 5 mm (0.19"))
Cycle Start	Automatic trigger sensor or optional foot pedal
Raw Material Type	PVC, PUR, rubber, Teflon, Tefzel, Kapton, etc.
Clamping	Programmable clamping force
Memory Capacity	1,000 wires or cables (memory function only with "extended wire") 100 wire lists / maximum 40 wires
Interfaces	Foot pedal, USB "Host"
Options	SmartDetect, Foot pedal, thin clamping jaws
Noise Level	<70 dB (A)
Power Supply	100 / 115 VAC, 230 / 240 VAC, 65 W / 50/60 Hz
Dimensions (L x W x H)	390 x 130 x 280 mm (15.3" x 5.1" x 11.0")
Weight	10 kg (22 Ibs.)
CE-Conformity	The UniStrip 2300 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note	Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. *Wires with hard insulations or those that are tightly bonded might not be able to be processed even if they are within the application range stated above. For cross sections larger than 6 mm² (10 AWG), sample processing is required.

Downloads

UniStrip 2300 catalogue