WireTwister 3300 D

Dual Head Twisting Machine

Overview

The WireTwister 3300 D is an efficient machine for twisting single wires into twisted pairs. Thanks to its dual head design, the WireTwister 3300 D achieves high production performance compared to a single head design. A touchscreen user interface makes it easy to enter and edit all twisting settings in a very short time. The moveable carriage with the two right side wire holders can be set in a precise position for the initial wire length. The ergonomic access to the wire holders and start buttons on the cabinet and carriage allow quick and easy operation of the machine. Automatic moveable safety shields in front of the rotating wire holders provide safe and comfortable operation.

Simple UI system for easy operation
Program capacity up to 1,000 programs
Optional scanning function to search jobs easily
Different machine lengths for different twisting wire lengths

Features

Thanks to its modular design, configurations from 1.8 m (71.0”) up to 11.4 m (449.0”) in length are available in 2.4 m (94.5”) increments
Programmable twisting machine for single wires from 2 x 0.13 up to 2 x 3 mm²
(2 x 26 AWG up to 2 x 12 AWG)

Technical Data

Raw Material Length (untwisted)	300 mm up to 1,800 / 4,200 / 6,600 / 9,000 / 11,400 mm (11.8” up to 71 / 165 / 260 / 354 / 449”)
Length of Lay (Pitch)	10 – 50 mm (0.39 – 1.97“)
Conductor Cross-Section	2 x 0.13 up to 2 x 3 mm² (2 x 26 AWG up to 2 x 12 AWG)
Length of Open (Untwisted) Ends	30 – 100 mm (1.18 – 3.94“)
Difference in Open Ends	0 – 60 mm (0 – 2.36“)
Memory Capacity	up to 1,000 programs
Twisting Speed	800 – 2,000 rpm
Power Supply	230 VAC +/-5%, 50/60 Hz, <1kw, compressed air 6 bar (90 psi)
Dimensions (L x W x H)	2,800 x 800 x 1,300 mm, 200 kg (111.2 x 31.5 x 51.2“, 440 lbs) 5,200 x 800 x 1,300 mm, 290 kg (204.7 x 31.5 x 51.2“, 640 lbs) 7,600 x 800 x 1,300 mm, 380 kg (299.2 x 31.5 x 51.2“, 840 lbs) 10,000 x 800 x 1,300 mm, 470 kg (393.7 x 31.5 x 51.2“, 1,040 lbs) 12,400 x 800 x 1,300 mm, 470 kg (488.2 x 31.5 x 51.2“, 1,240 lbs)
CE-Conformity	The WireTwister 3300 D fully complies with all CE and EMV equipment guidelines relative to mechanical and electrical safety and electro-magnetic compatibility.
Important Note	Schleuniger recommends that wire sample be submitted in cases where there is doubt as to the processing capabilities of a particular machine

Downloads

WireTwister 3300 D catalogue